SFP
LOS PRECIOS PUBLICADOS SON SIMBOLICOS, CONTACTA PARA QUE PUEDAS OBTENER UNA COTIZACIÓN.
Disponible para reserva
-
Product Features
Up to 10Gbps data links
10km with 9/125µm SMF
1310nm DFB laser
Duplex LC Connector
Hot-pluggable SFP+ footprint
Single 3. 3V power supply
Operating temperature: 0℃ to 70℃ Ethernet
RoHS
Digital Diagnostic Monitor compatible
Power Consumption < 0.8W
-
Applications
√ 10GBase-LR/LW 10G
√ 1200-SM-LL-L 10
-
1. Product Description
The RZSFPP1310GLR is a 10Gbps enhanced small form factor pluggable SFP+ transceiver compatible with 10GBASE-LR/LW and 10G Fiber Channel 1200-SM-LL-L. It is suitable for singlemode fiber (SMF) communications in 10Gbps Ethernet and 10G Fiber Channel
-
2. Regulatory Compliance
OPT transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
-
3. Absolute Maximum Ratings
Parameter Operating Case Temperature Min Max. Unit Supply Voltage VCC -0.5 4 V Storage Temperature TS -40 85 °C Operating Case Temperature TC 0 70 °C -
4. Recommended Operating Conditions
Parameter Symbol Min. Typical Max Unit Operating Case Temperature TC 0 70 °C Power Supply Voltage VCC 3.15 3.3 3.45 45 V Power Supply Current ICC 200 mA Data Rate 10 GBps Max Link Length on 9/125µm SMF Lmax 10 km -
5. Optical Characteristics
Parameter Symbol Min. Typical Max Unit Transmitter Centre Wavelength λc 1260 1310 1360 nm Spectral Width (-20dB) σ 1 nm Average Output Power Pout -5 0 dBm Extinction Ratio ER 3.5 dB Average Launch Power of Off Transmitter Poff -30 dBm Receiver Centre Wavelength λc 1200 1310 1600 nm Receiver Sensitivity PIN -14 dBm Receiver Overload Pmax 0.5 dBm LOS De-Assert LOSD -20 dBm LOS Assert LOSA 23 dBm LOS Hysteresis 0.5 4.5 dm -
6. Electrical Characteristic
Parameter Symbol l Min. Typical Max. Unit Transmitter Input Differential Impedance Zin 90 100 110 Ω Data Input Swing Differential Vin 250 1200 mV Tx-Dis Disable Vd 2.0 Vcc V Tx-Dis Enable Ven 0 0.8 V Receiver Data Output Swing Differential Vout 250 800 mV Rx-Los Fault Vlf 2.0 VccHOST V Rx-Los Normal Vln 0 0+0.8 V Output rise and fall time Tr, Tf 30 ps -
7. Pin Descriptions
Pin Symbol Description Ref. 1 VEET Transmitter Ground (Common with Receiver Ground) 7.1 2 TFAULT Transmitter Fault. Not supported 3 TDIS Transmitter Disable. Laser output disabled on high or open 7.2 4 MOD_DEF(2) Module Definition 2. Data line for Serial ID. 7.3 5 MOD_DEF(1) Module Definition 1. Clock line for Serial ID. 7.3 6 MOD_DEF(0) Module Definition 0. Grounded within the module 7.3 7 RS0 Rate Select0, optionally controls SFP+ module receiver. When high input signaling rate>4.25 GBd and when low input signaling rate<4.25GBd 8 LOS Loss of Signal indication. Logic 0 indicates normal operation. . 7.4 9 RS1 Rate Select1, optionally controls SFP+ module receiver. When high input signaling rate>4.25 GBd and when low input signaling rate<4.25GBd 10 VEER Receiver Ground (Common with Transmitter Ground) 7.1 11 VEER Receiver Ground (Common with Transmitter Ground) 7.1 12 RD- Receiver Inverted DATA out. AC Coupled. 13 RD+ Receiver Non-inverted DATA out. AC Coupled. 14 VEER Receiver Ground (Common with Transmitter Ground) 7.1 15 VCCR Receiver Power Supply 16 VCCT Transmitter Power Supply 17 VEET Transmitter Ground (Common with Receiver Ground) 7.1 18 TD+ Transmitter Non-Inverted DATA in. AC Coupled 19 TD- Transmitter Inverted DATA in. AC Coupled. 20 VEET Transmitter Ground (Common with Receiver Ground) 7.1 Notes:
1.Circuit ground is internally isolated from chassis ground.
2.Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3.Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
4.LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
-
8. EEPROM & DDM THRESHOLD
Low Alarm Low Warn High Warn High Alarm Temperature -5℃ 0℃ 70℃ 75℃ Voltage 3V 3.1V 3.6V 3.7V Tx Bias 15mA 20mA 75mA 85mA Tx Power -8.5dBm -7.5dBm 0dBm 0.5dBm Rx Power -18.5dBm -16dBm 0.5dBm 1.5dBm -
9. Mechanical Specifications
Ver ultima imagen
-
10. LABEL
OPT offers label OEM design and print. Label barcode supports code128 and 2D barcode SIZE: 1) Front 35mm*10.5mm 2)Back 26mm*10.5mm
Ordering Information
Part No Data Rate DDM Wave Fiber Type Dist. Temp Optical Interface RZSFPP1310GLR 10Gbps yes 1310nm SMF 10km 0~70℃ LC VERSION UPDATE:
VERSION NO. DATE UPDATED INFORMATION V20160818 20160818 1. EEPROM& DDM Threshold updated 2. “LABEL” added
3. Ordering information updated 4. Product picture updated
NOTICE:
OPT reserves the right to make changes to this product in this specification without notice, in order to improve product
Productos relacionados
-
WDM
[caption id="attachment_3782" align="alignnone" width="122"]
FICHA TÉCNICA[/caption]
LOS PRECIOS PUBLICADOS SON SIMBOLICOS, CONTACTA PARA QUE PUEDAS OBTENER UNA COTIZACIÓN.
Valoraciones
No hay valoraciones aún.